Tender Texts

  • ABNM A5 - Thermic Actuators

    Modulating thermal actuator used to control pressure independent balancing and control valves DN 10-32

     

    • Control signal: 0-10 V
    • Valve stroke detection
    • Power consumption: 1 W standby
    • LOG(LIN*) characteristic
    • Halogen free cable: plug-in; 1 m (5 m and 10 m)
    • IP class: 54
    • Normally closed (open**) when de-energised
    • First open function (Normally closed variant)
    • Visible stroke indicator
    • Stroke: 5 (6.5mm***)
    • Supply voltage: 24 V AC, 50/60 Hz (24 V DC****

    * LIN variant available

     

    ** Normally open variant available

    *** 6.5mm variant available

    **** 24 V DC variant available

    AB-QM - Pressure Independent Balancing and Control Valve (PIBCV)

    The pressure independent balancing and control valve which means that the control characteristic is independent from the available pressure. The precise flow control performance of the AB-QM with a Danfoss actuator provides increased comfort and superior Total Cost of Ownership. The AB-QM ensures and controls the required flow on every terminal unit and maintains hydronic balance in the system

    AB-QM has the following features:

     

    • Flow limitation function
    • Modulating below 1% of set flow, regardless of the setting
    • Authority of 1 at all settings
    • Able to close against 16 bar of differential pressure
    • Linear control characteristic
    • Scale in percentage of flow
    • Control ratio 1:1000
    • Test plugs for pump optimisation and flow verification for DN 10-250

    Available in the range from DN 10 - 250 form one supplier.

     

    • Characteristic changed from linear to equal percentage characteristic at all sizes by adjusting actuator settings
    • Lockable setting
    • Starting pressure of 16 kPa for DN 10 - DN 20
    • Starting pressure 20 kPa for DN 25 - DN 32
    • Starting pressure 30 kPa for DN 40 - DN 250
    • Leakage rate of no visible leakage for DN 10 - DN 20 in combination with recommended actuator
    • Leakage of 0.05% of the Qnom for DN 25 - DN 100 in combination with recommended actuator
    • Leakage of 0.01% of the Qnom for DN 125 - DN 250 in combination with recommended actuator
     

    AME 110/120 NL/X - Gear Actuators

    Modulating geared actuator used to control pressure independent balancing and control valves DN10-32

     

    • Control signal: selectable 0(4) ... 20 mA and 0(2) ... 10 V
    • Valve stroke detection (No lead detection)
    • LIN/LOG setting
    • Halogen free cable: 1.5m (5m and 10m)
    • Position feedback signal: selectable 0(2) - 10 V*)
    • Power consumption: 2 VA running and 0.5W standby
    • Setting: easy accessible with DIP switch
    • Visible stroke indicator
    • LED signalling of actuator mode (running, standby, calibrate)
    • Manual override operation
    • Anti-blocking function
    • Supply voltage: 24 V AC, 50/60 Hz
    • Speed: 24 (12**) s/mm
    • Direct or inverse acting mode selector

    *AME 110 NLX variant

     

    ** AME 120 NL variant

    For tender texts for AME 435QM, AME55QM, AME85QM use tender text of AME435, AME55, AME85

    AME 435QM - For Modulating Control

    The actuators AME 435QM for modulating control is used with pressure independent balancing and control valve type AB-QM from DN 40 to DN 100

     

    • Actuator shall have LED signalisation
    • Actuator shall be able to mount/dismount on/off the valve without the need of any tools
    • Actuator shall have efficiency improving and energy saving anti-oscillation function
    • Actuator shall have ecternal reset/stand-by button
    • Easy electrical connection, snap on/off connection

     

    AME 55QM - Push / Pull Actuators for Larger AB-QM

    The actuator AME 55 QM is used with pressure independent balancing and control large valve type AB-QM DN 125 and DN 150

     

    • Actuator shall have LED signalisation
    • Actuator shall be able to capture operational data
    • Actuator shall have possibility to be modulating or 3-p controlled
    • Actuator shall have reset option

     

    AME 85QM - Push / Pull Actuators for Larger AB-QM

    AME 85QM actuator is used together with large pressure independent balancing and control valves type AB-QM DN 200 and DN 250

     

    • Actuator shall have LED signalisation
    • Actuator shall have possibility to be modulating or 3-p controlled
    • Actuator shall have reset button

     

    AMV 110/120 NL - Gear Actuators

    3-point modulating geared actuator used to control pressure independent balancing and control valves DN 10-32

     

    • Detection of valve stroke (No load detection)
    • Power consumption: 1 VA running and 0 W standby
    • Visible stroke indicator
    • Halogen free cable: 1.5 m (5 m and 10 m)
    • Manual override operation
    • Supply voltage: 24 V AC, 50/60 Hz
    • Speed: 24 (12*) s/mm

    * AMV 120 NL variant

     

    ASV-PV (4th gen.) - Differential Pressure Controller / Automatic Balancing Valve DN15-50

    Branch should be balanced with a differential pressure controller for dynamic hydronic balance, with the following characteristics:

     

    • Valve should keep stable differential pressure across the branch membrane driven controller
    • Valve should have variable differential pressure setting
    • Minimum needed differential pressure over the valve should not be higher than 10 kPa, independently from Dp setting
    • Valve should have metal to metal (valve cone and seat) sealing to ensure optimal performance of differential pressure control at low flows
    • Differential pressure setting should be linear via visual scale and without tool, locking function should be integrated to prevent unauthorised change of setting.
    • The setting range should be adaptable via spring replacement. Spring should be exchangeable under pressure.
    • Valve should provide differential pressure setting range fit to application to ensure optimal system performance (such as 5-25 kPa setting range for radiator based systems)
    • Valve capacity per valve size should cover flow range according to VDI 2073 Standards (with water velocity of up to 0.8 m/s)
    • Valve should have shut-off function separated from the setting mechanism. Shut-off service function should be possible to do by hand / without tools
    • Drain function should be integrated in valve
    • Valves should have integrated flushing service function. Flushing can be done with flushing accessory
    • Valve should be delivered with impulse tube. Inner diameter of impulse tube should not be bigger than 1.2 mm to ensure optimal performance within the system
    • Valve should be delivered with thermal insulation caps, up to 120°C
    • Valve should be delivered in reliable packaging for safe transport and handling

    Product Characteristics:

    1. Pressure class: PN 16
    2. Temperature range: 0 ... +120°C
    3. Connection size: DN 15-50
    4. Connection type: Internal thread ISO 7/1 (DN 15-50), External thread ISO 228/1 (DN 15-50)
    5. Δp setting range: 5-25 kPa, 20-60 kPa
    6. Max differential pressure across valve: 1.5 bar
    7. Installation: differential pressure controller should be mounted on return pipe with connection via impulse tube to supply pipe

     

    ASV-PV (3rd gen.) - Differential Pressure Controller / Automatic Balancing Valve

    Branch should be balanced with a differential pressure controller for dynamic hydronic balance, with following characteristics:

    • Valve should keep stable differential pressure across the branch by membrane driven controller
    • Valve should have variable Dp setting. Setting should be hidden or lockable to prevent unauthorised changes
    • Setting accuracy should be within ±10% of set differential pressure, proven by independent accredited third party
    • Minimum needed differential pressure over the valve should not be higher than 10 kPa, independently from Dp setting
    • Valve should have metal to metal (valve cone and seat) sealing to ensure optimal performance of differential pressure control at low flows
    • Differential pressure setting should be linear throughout the setting range (1 turn kPa or 1 turn 2 kPa depending on dimension)
    • The setting range should be adaptable via spring replacement in dimensions DN 15-40. Spring should be exchangeable under pressure
    • Valve should provide Dp setting range fit to application to ensure optimal system performance (such as 5-25 kPa setting range for radiator based systems)
    • Valve capacity per valve size should cover flow range according to VDI 2073 Standards (with water velocity of up to 0.8 m/s)
    • Valve should have shut-off function separated from the setting mechanism. Shut-off service function should be possible to do by hand / without tools
    • Drain function should be integrated in valve in dimension range of DN 15-50
    • Valve should be delivered with impulse tube. Inner diameter of impulse tube should not be bigger than 1.2 mm to ensure optimal performance within the system
    • Valve in DN 15-40 range should be delivered with thermal insulation caps, min. 80°C
    • Valve should be delivered in reliable packaging for safe transport and handling
    Product Characteristics:
    • Pressure class: PN 16 
    • Temperature range: -10 ... +120°C
    • Valve size: DN 15-100
    • Installation: on return pipe with connection via impulse tube to supply pipe

    DN 15-25:

    • Connection type: Internal thread ISO 7/1 and External thread ISO 228/1
    • Dp setting range: 5-25 kPa, 20-60 kPa
    • Max Dp: 1.5 bar

    DN 32-40:

    • Connection type: Internal thread ISO 7/1 and External thread ISO 228/1
    • Dp setting range: 5-25 kPa, 20-60 kPa, 35-75 kPa
    • Max Dp: 2.5 bar

    DN 50:

    • Connection type: External thread ISO 228/1
    • DP setting range: 5-25 kPa, 20-40 kPa, 35-75 kPa, 60-100 kPa
    • Max Dp: 2.5 bar

    DN 65-100:

    • Connection type: Flange EN 1092-2
    • Dp setting range: 20-40 kPa, 35-75 kPa, 60-100 kPa
    • Max Dp: 2.5 bar

     

    MSV-BD - Manual Balancing Valves

    Product is a manual valve for balancing flow in heating, cooling and domestic hot water systems. Branch should be balanced with a manual pre-setting valve with test plugs for commissioning or/and flow verification, with the following characteristics:

     

    • Shut-off function - with position indication - separated from the setting function
    • Visible pre-setting from all sides
    • Possibility for tamper proof locking of the handle, to prevent unauthorised changes of the pre-setting
    • Removable handle during installation phase
    • 360° rotating measuring station (drain tap and test plugs)
    • Possibility of draining and filling the system on both sides of the valve
    • Bi-directional flow possible
    • Self-sealing, parallel test plugs
    • Leakage rate A according to ISO 5208
    • Pressure class PN 20
    • DN 15(LF)-50 Connection type: Internal thread IS) 7/1 or 
    • DN 15(LF)-20 Connection type: External thread ISO 228/1
    • Temperature range: -20°C - 120°C
    • DP Max 2.5 bar
    • Valve body DZR
    • Ball chromium plated
    • O-rings EPDM rubber

     

    MSV-F2 - Manual Balancing Valve

    Product is a manual presetting valve for balancing the flow in heating and cooling installations

     

    • Pre-setting valves visible on a digital scale
    • Position indicator and stroke limiter
    • Lockable presetting
    • Non-rising hand wheel
    • Shut-off function
    • Leakage rate A according to ISO 5208
    • Pre-mounted test plugs
    • The valve should have a measuring accuracy on 8% at 25% pf of max. setting accouring to BS7350
    • Pressure class: PN 16 or PN 25
    • Temperature range: PN 16 : Flow temperature: -10°C ... 130°C & PN 25: Flow temperature: -10°C ... 150°C
    • DP max 2.5 bar
    • Connection size: DN 15-400
    • Connection type: Flange connections

     

    MTCV - Hot Water Valves

    Domestic hot water installations should be balanced with thermostatic balancing valve for a constant water temperature in the system with following characteristics:

     

    • Temperature setting range: 35 - 60°C
    • Temperature pre-setting valves visible on a visual scale
    • Setting should be hidden or lockable to prevent unauthorised change (Allen key)
    • Thermostatic module should be integrated to ensure optimal thermal balance
    • Optional upgrade with thermal disinfection module to prevent Legionella bacteria in hot water systems:automatic (self acting) disinfection or electronically controlled disinfection (controller with thermal actuator and temperature sensors)
    • Disinfection upgrade can be done during operation, under pressure
    • Thermo element should be replaceable for easier maintenance
    • Material in contact with water should be compliant with No Lead Brass EU directive
    • Valve body should be made of Bronze for better durability and corrosion resistance
    • Water temperature measurement should be optional
    • Shut-off function bu optional fittings with a built-in ball valve
    • Valves should have flow indication mark
    • Reliable packaging for safe transport and handling
    Product Characteristics:

     

     

    • Pressure class: PN10
    • Maximum medium temperature: 100°C
    • Connection size: DN 15-20
    • Connection type: Internal thread ISO 7/1
    • Maximum differential pressure: 100 kPa
    • Factory pre-setting: 50°C
    • Installation: valve should be mounted on circulation pipe

     

    NovoCon®S - Digital / Hybrid Actuator

    Modulating geared actuator with bus connectivity used to control pressure independent balancing and control valves DN10-32.


    Control signal - hybrid version: BACnet MS/TP, Modbus RTU*, 0-10V/2-10V, 0-20/4-20mA control signal - digital version: BACnet MS/TP, Modbus RTU*

    Actuator functions remotely accessible via the bus:

     

    • Design flow pre-setting
    • Flushing the valve and terminal unit
    • Error during closing intrinsic alarm reporting
    • LIN/LOG/α-setting characteristics setting
    • Speed selection 6/12/24 s/mm
    • Opening/closing time selection from 18s to 700s
    • Auto BACnet addressing
    • Auto Baud rate detection
    • Flow indication based on measured stroke in l/h
    Supply Voltage: 24V AC/DC Spindle position accuracy: ±0.05mm

     

    Cables: Halogen free plug-in available in 1.5m, 5m and 10m length

    IP Class: 54

    Stroke: 7mm

    BACnet Testing Laboratories (BTL) listed BACnet MS/TP fieldbus device**

    Manual operation

     

    *Modbus RTU will be available in Q2.2016

    ** BACnet certification in progress and will be available in Q2.2016

    RA-DV - Dynamic Valve

     

    •  The valve shall keep a differential pressure at 10 kPa at all flows
    • The valve has to be Keymark certified (EN215 approved)
    • It shall be possible to do presetting of the water flow, without the use of tools
    • It shall be possible to measure pressure across the valve
    • Each radiator shall be controlled using a pressure independent thermostatic radiator valve (PITRV)
    • The valve shall have a minimum operating pressure of no more than 10 kPa
    • Valves shall be PN10 rated, capable of working at up to 95°C
    • Valves shall be capable of closing 60 kPa differential pressure
    • Standard sensors, remote and built-in shall be lockable and temperature limitable
    • Where selected sensors should be fully tamperproof
    • The valve has to be building size Series F according to EN215
    • The sensors shall be gas filled to enable better use of 'free heat'
    • It should be possible to flush the installation without demounting the valve
    • The valve shall have precise and repeatable multi-positional pre-setting feature
    • The supplier should be TS16494 compliant
    Specified valve: Danfoss RA-DV

     

    Specified sensor: Danfoss RA2000

    TWA-Z - Thermic Actuator

    On/Off thermal actuator used to control pressure independent balancing and control valves DN 10-32

     

    • Supply voltage: 24 V AC/DC (230 V, 50/60 Hz*)
    • Height: 60mm from valve adapter
    • Cables: PVC (Halogen free**) 1.2 m (5 m and 10 m)
    • Normally closed (open***) when de-energised
    • First open function (normally closed variant)
    • Visible stroke indicator
    • Power consumption: 2 W standby
    * 230 V variant

     

    ** Halogen free cables available only for normally closed variant

    *** normally open variant 

Be social Take part

Want to socialize with us?

Get to know us and take part in the conversation
{ "$id": "1", "AcceptTypes": [ "text/html", "application/xhtml+xml", "application/xml;q=0.9", "*/*;q=0.8" ], "AnonymousID": null, "ApplicationPath": "/", "Browser": { "$id": "2", "UseOptimizedCacheKey": true, "Capabilities": { "$id": "3", "canInitiateVoiceCall": "false", "isColor": "false", "supportsDivAlign": "true", "requiresFullyQualifiedRedirectUrl": "false", "requiresAttributeColonSubstitution": "false", "maximumRenderedPageSize": "2000", "backgroundsounds": "false", "requiresUniqueHtmlCheckboxNames": "false", "rendersBreakBeforeWmlSelectAndInput": "false", "supportsItalic": "false", "ecmascriptversion": "0.0", "isMobileDevice": "false", "rendersBreaksAfterWmlInput": "false", "preferredRenderingMime": "text/html", "vbscript": "false", "w3cdomversion": "0.0", "rendersWmlSelectsAsMenuCards": "false", "supportsAccesskeyAttribute": "false", "supportsDivNoWrap": "false", "requiresLeadingPageBreak": "false", "rendersWmlDoAcceptsInline": "true", "requiresPhoneNumbersAsPlainText": "false", "SupportsMaintainScrollPositionOnPostback": "false", "minorversion": "0", "jscriptversion": "0.0", "supportsImageSubmit": "false", "preferredImageMime": "image/gif", "supportsVCard": "false", "screenBitDepth": "1", "requiresOutputOptimization": "false", "requiresContentTypeMetaTag": "false", "gatewayVersion": "None", "supportsFontName": "false", "inputType": "telephoneKeypad", "maximumSoftkeyLabelLength": "5", "version": "0.0", "beta": "false", "canRenderOneventAndPrevElementsTogether": "true", "supportsIModeSymbols": "false", "requiresAdaptiveErrorReporting": "false", "requiresUrlEncodedPostfieldValues": "false", "aol": "false", "crawler": "false", "requiresSpecialViewStateEncoding": "false", "win16": "false", "majorversion": "0", "supportsQueryStringInFormAction": "true", "requiresPostRedirectionHandling": "false", "requiresNoBreakInFormatting": "false", "requiresXhtmlCssSuppression": "false", "canRenderSetvarZeroWithMultiSelectionList": "true", "preferredRenderingType": "html32", "mobileDeviceModel": "Unknown", "requiresControlStateInSession": "false", "gatewayMajorVersion": "0", "canCombineFormsInDeck": "true", "cookies": "true", "frames": "false", "requiresAbsolutePostbackUrl": "false", "supportsJPhoneMultiMediaAttributes": "false", "javaapplets": "false", "supportsEmptyStringInCookieValue": "true", "canRenderAfterInputOrSelectElement": "true", "supportsSelectMultiple": "true", "mobileDeviceManufacturer": "Unknown", "javascript": "false", "tagwriter": "System.Web.UI.Html32TextWriter", "canSendMail": "true", "supportsCallback": "false", "supportsUncheck": "true", "platform": "Unknown", "canRenderPostBackCards": "true", "": "MobileSafari/602.1 CFNetwork/808.3 Darwin/16.3.0", "defaultSubmitButtonLimit": "1", "requiresUniqueHtmlInputNames": "false", "cdf": "false", "supportsFileUpload": "false", "supportsBodyColor": "true", "canRenderMixedSelects": "true", "hasBackButton": "true", "gatewayMinorVersion": "0", "maximumHrefLength": "10000", "tables": "false", "hidesRightAlignedMultiselectScrollbars": "false", "browser": "Unknown", "supportsFontColor": "true", "activexcontrols": "false", "msdomversion": "0.0", "supportsCss": "false", "supportsMultilineTextBoxDisplay": "false", "win32": "false", "supportsCacheControlMetaTag": "true", "requiredMetaTagNameValue": "", "canRenderInputAndSelectElementsTogether": "true", "canRenderEmptySelects": "true", "supportsBold": "false", "rendersBreaksAfterHtmlLists": "true", "supportsRedirectWithCookie": "true", "supportsInputMode": "false", "supportsJPhoneSymbols": "false", "numberOfSoftkeys": "0", "requiresDBCSCharacter": "false", "rendersBreaksAfterWmlAnchor": "false", "supportsFontSize": "false", "supportsInputIStyle": "false", "requiresUniqueFilePathSuffix": "false", "type": "Unknown" }, "Adapters": { "$id": "4", "System.Web.UI.HtmlControls.HtmlForm, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a": "FormActionRewriterControlAdapter" }, "HtmlTextWriter": null, "Id": "default", "Browsers": [ "default" ], "ClrVersion": { "$id": "5", "Major": 0, "Minor": 0, "Build": -1, "Revision": -1, "MajorRevision": -1, "MinorRevision": -1 }, "Type": "Unknown", "Browser": "Unknown", "Version": "0.0", "MajorVersion": 0, "MinorVersionString": "0", "MinorVersion": 0.0, "Platform": "Unknown", "TagWriter": "System.Web.UI.Html32TextWriter, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a", "EcmaScriptVersion": { "$id": "6", "Major": 0, "Minor": 0, "Build": -1, "Revision": -1, "MajorRevision": -1, "MinorRevision": -1 }, "MSDomVersion": { "$id": "7", "Major": 0, "Minor": 0, "Build": -1, "Revision": -1, "MajorRevision": -1, "MinorRevision": -1 }, "W3CDomVersion": { "$id": "8", "Major": 0, "Minor": 0, "Build": -1, "Revision": -1, "MajorRevision": -1, "MinorRevision": -1 }, "Beta": false, "Crawler": false, "AOL": false, "Win16": false, "Win32": false, "Frames": false, "RequiresControlStateInSession": false, "Tables": false, "Cookies": true, "VBScript": false, "JavaScript": false, "JavaApplets": false, "JScriptVersion": { "$id": "9", "Major": 0, "Minor": 0, "Build": -1, "Revision": -1, "MajorRevision": -1, "MinorRevision": -1 }, "ActiveXControls": false, "BackgroundSounds": false, "CDF": false, "MobileDeviceManufacturer": "Unknown", "MobileDeviceModel": "Unknown", "GatewayVersion": "None", "GatewayMajorVersion": 0, "GatewayMinorVersion": 0.0, "PreferredRenderingType": "html32", "PreferredRequestEncoding": null, "PreferredResponseEncoding": null, "PreferredRenderingMime": "text/html", "PreferredImageMime": "image/gif", "ScreenCharactersWidth": 80, "ScreenCharactersHeight": 40, "ScreenPixelsWidth": 640, "ScreenPixelsHeight": 480, "ScreenBitDepth": 1, "IsColor": false, "InputType": "telephoneKeypad", "NumberOfSoftkeys": 0, "MaximumSoftkeyLabelLength": 5, "CanInitiateVoiceCall": false, "CanSendMail": true, "HasBackButton": true, "RendersWmlDoAcceptsInline": true, "RendersWmlSelectsAsMenuCards": false, "RendersBreaksAfterWmlAnchor": false, "RendersBreaksAfterWmlInput": false, "RendersBreakBeforeWmlSelectAndInput": false, "RequiresPhoneNumbersAsPlainText": false, "RequiresUrlEncodedPostfieldValues": false, "RequiredMetaTagNameValue": null, "RendersBreaksAfterHtmlLists": true, "RequiresUniqueHtmlInputNames": false, "RequiresUniqueHtmlCheckboxNames": false, "SupportsCss": false, "HidesRightAlignedMultiselectScrollbars": false, "IsMobileDevice": false, "RequiresAttributeColonSubstitution": false, "CanRenderOneventAndPrevElementsTogether": true, "CanRenderInputAndSelectElementsTogether": true, "CanRenderAfterInputOrSelectElement": true, "CanRenderPostBackCards": true, "CanRenderMixedSelects": true, "CanCombineFormsInDeck": true, "CanRenderSetvarZeroWithMultiSelectionList": true, "SupportsImageSubmit": false, "RequiresUniqueFilePathSuffix": false, "RequiresNoBreakInFormatting": false, "RequiresLeadingPageBreak": false, "SupportsSelectMultiple": true, "SupportsBold": false, "SupportsItalic": false, "SupportsFontSize": false, "SupportsFontName": false, "SupportsFontColor": true, "SupportsBodyColor": true, "SupportsDivAlign": true, "SupportsDivNoWrap": false, "RequiresContentTypeMetaTag": false, "RequiresDBCSCharacter": false, "RequiresHtmlAdaptiveErrorReporting": false, "RequiresOutputOptimization": false, "SupportsAccesskeyAttribute": false, "SupportsInputIStyle": false, "SupportsInputMode": false, "SupportsIModeSymbols": false, "SupportsJPhoneSymbols": false, "SupportsJPhoneMultiMediaAttributes": false, "MaximumRenderedPageSize": 2000, "RequiresSpecialViewStateEncoding": false, "SupportsQueryStringInFormAction": true, "SupportsCacheControlMetaTag": true, "SupportsUncheck": true, "CanRenderEmptySelects": true, "SupportsRedirectWithCookie": true, "SupportsEmptyStringInCookieValue": true, "DefaultSubmitButtonLimit": 1, "SupportsXmlHttp": false, "SupportsCallback": false, "MaximumHrefLength": 10000 }, "ClientCertificate": [], "Cookies": [ "EktGUID", "EkAnalytics", "ASP.NET_SessionId", "ecm" ], "Headers": [ "Connection", "Accept", "Accept-Encoding", "Host", "Max-Forwards", "User-Agent", "X-Original-URL", "X-Forwarded-For", "X-ARR-LOG-ID", "X-Forwarded-For-Port" ], "IsLocal": false, "Params": [ "pageid", "EktGUID", "EkAnalytics", "ASP.NET_SessionId", "ecm", "ALL_HTTP", "ALL_RAW", "APPL_MD_PATH", "APPL_PHYSICAL_PATH", "AUTH_TYPE", "AUTH_USER", "AUTH_PASSWORD", "LOGON_USER", "REMOTE_USER", "CERT_COOKIE", "CERT_FLAGS", "CERT_ISSUER", "CERT_KEYSIZE", "CERT_SECRETKEYSIZE", "CERT_SERIALNUMBER", "CERT_SERVER_ISSUER", "CERT_SERVER_SUBJECT", "CERT_SUBJECT", "CONTENT_LENGTH", "CONTENT_TYPE", "GATEWAY_INTERFACE", "HTTPS", "HTTPS_KEYSIZE", "HTTPS_SECRETKEYSIZE", "HTTPS_SERVER_ISSUER", "HTTPS_SERVER_SUBJECT", "INSTANCE_ID", "INSTANCE_META_PATH", "LOCAL_ADDR", "PATH_INFO", "PATH_TRANSLATED", "QUERY_STRING", "REMOTE_ADDR", "REMOTE_HOST", "REMOTE_PORT", "REQUEST_METHOD", "SCRIPT_NAME", "SERVER_NAME", "SERVER_PORT", "SERVER_PORT_SECURE", "SERVER_PROTOCOL", "SERVER_SOFTWARE", "URL", "HTTP_CONNECTION", "HTTP_ACCEPT", "HTTP_ACCEPT_ENCODING", "HTTP_HOST", "HTTP_MAX_FORWARDS", "HTTP_USER_AGENT", "HTTP_X_ORIGINAL_URL", "HTTP_X_FORWARDED_FOR", "HTTP_X_ARR_LOG_ID", "HTTP_X_FORWARDED_FOR_PORT" ], "QueryString": [ "pageid" ], "RawUrl": "/download/tender-texts/", "UserAgent": "CCBot/2.0 (http://commoncrawl.org/faq/)", "UserHostAddress": "193.162.34.200", "UserHostName": "193.162.34.200", "UserLanguages": null }